Elsner Corlo Touch KNX 5in WL Handleiding (144 Pagina's)

Handleiding

46 System settings via touch display

Display Corlo Touch KNX 5in • Status: 30.08.2021 • Technical changes and errors reserved.

Then use the Next key (bottom right) to skip to the next setting.

Scroll to the desired setting using the arrow keys on the rocker.

Then use the Next key (bottom right) to skip to the next setting.

Confirm with OK to save and return to the previous menu selection.

You can save using OK at any time, or cancel using the skip back arrow or the

house button without saving.

2.5.2. Colour

 Settings > system > ambient lighting

If the brightness value is fixed and the

control is done via the KNX bus, brightness

(or start brightness) can be set in percent.

Scroll to the desired setting using the +/-

buttons on the rocker.

For all types of brightness control except the

object control (via KNX bus), automatic

switch-off can be set.

This automatic switch off switches off the

ambient lighting after the pre-set waiting

time.

The automatic switch off may be

• set to OFF.

• set to ON.

• switch off if room dark.

If the automatic switch off is activated, you

now set the waiting time until switch off.

Scroll to the desired setting using the +/-

buttons on the rocker.

Bekijk gratis de handleiding van Elsner Corlo Touch KNX 5in WL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.