Elsner Corlo Touch KNX 5in WL handleiding
Handleiding
Je bekijkt pagina 14 van 144
12 Description
Display Corlo Touch KNX 5in • Status: 30.08.2021 • Technical changes and errors reserved.
Wall mounting
Connect KNX bus, auxiliary voltage and where required the connection line inputs to
the display unit.
Abb. 1
A socket with 4 screw domes faciliates installati-
on.
Abb. 2
Bolt the mounting unit on to the socket. The ar-
row („TOP“) must point upwards.
Two screws (right/left or top/bottom) are enough.
TOP
Abb. 3
If the screw domes of the box used are not cove-
red with the mounting unit's longitudinal holes,
the mounting unit can alternatively be bolted via
the other holes (e.g. for other installation sys-
tems).
Abb. 4
Example: Boxes from Swiss systems.
Bekijk gratis de handleiding van Elsner Corlo Touch KNX 5in WL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | Corlo Touch KNX 5in WL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17270 MB |
