Elsner Cala Touch KNX TH handleiding
Handleiding
Je bekijkt pagina 9 van 118
7 Commissioning
Room Controller Cala Touch KNX • Version: 13.07.2022 • Technical changes and errors excepted.
Cala Touch KNX AQS/TH functions (no. 70820, 70822):
• Measuring the CO
2
-concentration of the air, the temperature and air
humidity (relative, absolute), each with mixed value calculation. The share
of internal measurement value and external value can be set as a percentage
• Bus message, whether the values for temperature and air humidity are within
the comfort field (DIN 1946). Dew point calculation
• Threshold values can be adjusted per parameter or via communication
objects
• PI-controller for heating (one or two-level) and cooling (one or two-level)
according to temperature. Regulation according to separate set points or basic
set point temperature. Fan coil control
• PI controller for ventilation according to humidity and CO
2
-concentration:
Ventilate/Air (one-level) or Ventilate (one or two-levels)
Cala Touch KNX TH functions (no. 70810, 70812):
• Temperature and air humidity measurement (relative, absolute), in each
case with mixed value calculation. The share of internal measurement value
and external value can be set as a percentage
• Bus message, whether the values for temperature and air humidity are within
the comfort field (DIN 1946). Dew point calculation
• Threshold values can be adjusted per parameter or via communication
objects
• PI-controller for heating (one or two-level) and cooling (one or two-level)
according to temperature. Regulation according to separate setpoints or basic
set point temperature. Fan coil control
• PI controller for ventilation according to humidity: Ventilate/Air (one-level)
or Ventilate (one or two-level)
Cala Touch KNX T functions (no. 70800, 70802):
• Measuring the Temperature with a mixed value calculation. The share of
internal measurement value and external value can be set as a percentage
• Threshold values can be adjusted per parameter or via communication
objects
• PI-controller for heating (one or two-level) and cooling (one or two-level)
according to temperature. Regulation according to separate set points or basic
set point temperature. Fan coil control
3. Commissioning
Configuration is made using the KNX software as of ETS 5. The product file can be
downloaded from the ETS online catalogue and the Elsner Elektronik website on
www.elsner-elektronik.de in the “Service” menu.
After the bus voltage has been applied, the device will enter an initialisation phase last-
ing approx. 5 seconds. During this phase no information can be received or sent via the
bus.
Bekijk gratis de handleiding van Elsner Cala Touch KNX TH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | Cala Touch KNX TH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11667 MB |
