Elsner Cala KNX T 202 Sunblind handleiding

Niet gecategoriseerd

Elsner

42 pagina's

PDF beschikbaar

Handleiding

3 Description

Cala KNX T 201/202 Sunblind push button • Version: 04.10.2021 • Technical changes and errors excepted.

1. Description

The Cala KNX T 201/202 Sunblind push button has touch-sensitive buttons with

which functions can be called up in the KNX building bus system. The glass surface is

printed with areas for setting the temperature and solar protection. White LEDs are in-

tegrated in these areas and their behaviour can be adjusted.

A temperature sensor is integrated into Cala KNX T 201/202 Sunblind. An external

temperature reading can be received via the bus and processed with its own data to

create a total temperature (mixed value).

The Cala KNX T 201/202 Sunblind has a PI controller for heating and cooling. The

setpoint temperature can be changed using the "+" and "-" touch buttons.

Communication objects can be linked via AND and OR logic gates.

The device is supplemented with a frame of the switch series used in the building, and

thus fits seamlessly into the interior fittings.

Functions:

• Operating zone for temperature control with 2 areas (warmer, cooler)

• LEDs can be set. All LEDs Off, all LEDs as ambient lighting, all LEDs

individually controllable

• Area function when touching two or more push buttons. Can be configured

as switch, selector switch, as 8 or 16 bit encoder or for scenario recall

• Temperature measurements. Mixed value from own measured value and

external values (proportion can be set by percentage), output of minimum and

maximum values

• PI-controller for heating (one or two-level) and cooling (one or two-level)

according to temperature. Regulation according to separate setpoints or basic

setpoint temperature

• 2 AND and 2 OR logic gates each with 4 inputs. 8 logic inputs (in the form

of communications objects) can be used as inputs for the logic gates. The

output from each gate can be configured optionally as 1-bit or 2 x 8-bit

Additional functions Cala KNX T 201 Sunblind:

• 1 operating zone for blinds, awnings, shutters or windows with 2 areas (up/

down with short/long distinction)

Additional functions Cala KNX T 202 Sunblind:

• 2 operating zones for blinds, awnings, shutters or windows with 2 areas

(up/down with short/long distinction)

Configuration is made using the KNX software as of ETS 5. The product file can be

downloaded from the ETS online catalogue and the Elsner Elektronik website on

www.elsner-elektronik.de in the “Service” menu. There you will also find the

product manual.

Bekijk gratis de handleiding van Elsner Cala KNX T 202 Sunblind, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.