Elsner Cala KNX T 202 Sunblind handleiding

Niet gecategoriseerd

Elsner

42 pagina's

PDF beschikbaar

Handleiding

36 Setting the parameters

Cala KNX T 201/202 Sunblind Push Button • Version: 04.10.2021 • Technical changes and errors excepted

OR logic

9.8.1. AND logic outputs 1/2 and OR logic outputs 1/2

The same setting options are available for AND and OR logic.

Each logic output may transmit one 1-bit or two 8-bit objects. Determine what the out

put should send if logic = 1 and = 0.

If the output type is a 1-bit object, set the output values for the various conditions.

If the output type is two 8-bit objects, set the type of object and the output values

for the various conditions.

OR logic 1/2 not active • active

1. / 2. / 3. / 4. Input • Do not use

• Logic inputs 1...8

• Logic inputs 1...8 inverted

•

Temperature sensor malfunction = ON

• Temperature sensor malfunction = OFF

only with OR logic:

• Switching output AND logic 1/2

• Switching output AND logic 1/2 inverted

Output type • a 1-bit-object

• sends two 8-bit objects

Output value

if logic = 1

1 • 0

Output value

if logic = 0

1 • 0

Output value

If block active

1 • 0

Output value if

monitoring time exceeded

1 • 0

Object type • value (0…255)

• Percent (0…100%)

• Angle (0…360°)

• Scene call-up (0…63)

Output value object A

if logic = 1

0 … 255 / 100% / 360° / 63; 1

Output value object B

if logic = 1

0 … 255 / 100% / 360° / 63; 1

Output value object A

if logic = 0

0 … 255 / 100% / 360° / 63; 0

Output value object B

if logic = 0

0 … 255 / 100% / 360° / 63; 0

Bekijk gratis de handleiding van Elsner Cala KNX T 202 Sunblind, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.