Elsner Cala KNX T 202 Sunblind handleiding

Niet gecategoriseerd

Elsner

42 pagina's

PDF beschikbaar

Handleiding

34 Setting the parameters

Cala KNX T 201/202 Sunblind Push Button • Version: 04.10.2021 • Technical changes and errors excepted

9.7.2. Control modes for drive control

Behaviour on button actuation in standard control mode:

Standard:

If briefly operated, the drive will move incrementally or stops. If operated longer, the

drive will move up to the end position. The time difference between "short" and "long"

is set individually.

Standard inverted:

When pushed shortly, the drive moves up to the end position. When pushed for longer,

the drive moves incrementally or stops. The time difference between "short" and

"long" and the repeat interval is set individually.

Comfort mode:

In the comfort mode actuating the button briefly, a bit longer and long will trigger dif-

ferent responses of the drive. The time intervals are set individually.

Short actuation (shorter than Time 1): The drive is positioned step-wise and stopped.

Holding it slightly longer (longer than Time 1, but shorter than Time 1+2): Drive run-

ning. Drive stops when the button is released.

Long holding (release after Time 1+2 runs out): Drive moves independently to the end

position. The movement can be interrupted by a short tap.

short hold

Blind Stop/Step Up or down

Shutters Stop Up or down

Awning Stop Retract or extend

Windows Stop Closed or open

Control mode Standard

Behavior during button operation:

short = stop/increment long = Up or Down

Time between short and long

in 0.1 seconds

1...50; 10

Control mode Standard inverted

Behavior during button operation:

short = Up or Down long = Stop/Step

Time between short and long

in 0.1 seconds

1...50; 10

Repeat the step command

for a long button press

every 0.1 s • every 2 sec; every 0.5 sec

Bekijk gratis de handleiding van Elsner Cala KNX T 202 Sunblind, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.