Elsner Cala KNX T 202 Sunblind handleiding

Niet gecategoriseerd

Elsner

42 pagina's

PDF beschikbaar

Handleiding

18 Setting the parameters

Cala KNX T 201/202 Sunblind Push Button • Version: 04.10.2021 • Technical changes and errors excepted

Block

The switching output can be blocked using an object.

Set the cases in which threshold vlaues and delay times received per object are to be

retained.

The behaviour of the switching output on release is dependent on the value of the pa-

rameter "Switching output sends" (see "Switching output")

9.5. Temperature PI controller

Activate the controller if you want to use it.

Switching output sends • on change

• on change to 1

• on change to 0

• on change and periodically

• on change to 1 and periodically

• on change to 0 and periodically

Cycle

(is sent only if "periodically" is selected)

5 s • 10 s • 30 s… • 2 h

Use switching output block No • Yes

Assessment of the block object • At value 1: block | At value 0: release

• At value 0: block | At value 1: release

Blocking object value before first Commu-

nication

0 • 1

Switching output behaviour

On blocking • Do not send message

• 0 Send

• 1 Send

On release

(with 2 second release delay)

[Dependent on the "Switching output

sends" setting]

Switching output sends on change • Do not send message

• Send switching output status

Switching output sends on change to 1 • Do not send message

• if switching output = 1  send 1

Switching output sends on change to 0 • Do not send message

• if switching output = 0  send 0

Switching output sends on change and

periodically

Send switching output status

Switching output sends on change to 1 and

periodically

if switching output = 1 send 1

Switching output sends on change to 0 and

periodically

if switching output = 0 send 0

Use controller No • Yes

Bekijk gratis de handleiding van Elsner Cala KNX T 202 Sunblind, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.