Elna eXpressive 830 handleiding
Handleiding
Je bekijkt pagina 11 van 76
9
,
Remove the bobbin.
Insert the thread into one of the slits of the ange plate
and pull the thread to cut.
x
Put the bobbin on the bobbin winder spindle.
Be sure that the bobbin snaps into the place.
w
Bobbin
e
Bobbin winder spindle
r Slit
t Spring (Projection)
c
Pass the thread to the bobbin.
Hold the thread with both hands and wind it around the
bobbin clockwise several times.
z
w
x
b
Winding the bobbin
z
Draw the thread from the spool.
Guide the thread around the bobbin winder thread
guide.
q
Bobbin winder thread guide
v
n
NOTE:
For safety purposes, the machine will automatically stop
1.5 minutes after starting bobbin winding.
q
e
c
!0
u
y
v
Insert the thread into one of the slits
u
of the ange
plate
y
and pull the thread to cut.
y
Flange plate
u
Slit
b
Push the bobbin winder spindle
e
to the right.
The visual touch screen will show the bobbin winding
sign.
If you wish to wind the bobbin thread more quickly or
slowly, you can adjust the maximum bobbin winding
speed by pressing the “+” key
i
or “–” key
o
.
m
,
n
Press the start/stop button
!0
.
!0
Start/stop button
When the bobbin is fully wound, it will stop spinning
automatically.
Press the start/stop button
!0
to stop the machine.
m
Return the bobbin winder to its original position by
moving the spindle to the left.
e
i
o
NOTE:
Do not move the bobbin winder spindle while the
machine is running.
r
t
Bekijk gratis de handleiding van Elna eXpressive 830, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | eXpressive 830 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 0 MB |
