Elna eXcellence 580+ handleiding
Handleiding
Je bekijkt pagina 50 van 88
48
q
e
w
r
Round End and Fine Fabric Buttonholes
Machine settings
q Pattern: MODE 1: 25, 26
w Thread tension: AUTO
e Presser foot: Automatic buttonhole foot R
r Foot pressure: 5
The sewing procedure is the same as the square
buttonhole (refer to pages 44-46).
The machine will sew a buttonhole in the order shown.
q Starting point
NOTE:
The buttonhole width can be adjusted from 2.5 to 5.5.
The stitch density can be adjusted from 0.2 to 0.8.
Keyhole Buttonhole
Machine settings
q Pattern: MODE 1: 27
w Thread tension: AUTO
e Presser foot: Automatic buttonhole foot R
r Foot pressure: 5
The sewing procedure is the same as the square
buttonhole (refer to pages 44-46).
The machine will sew a buttonhole in the order shown.
Use an eyelet puncher to open a keyhole buttonhole.
q Starting point
w Eyelet puncher (not provided with the machine)
NOTE:
The buttonhole width can be adjusted from 5.5 to 7.0.
The stitch density can be adjusted from 0.3 to 0.8.
q
q
w
Stretch Buttonholes
Machine settings
q Pattern: MODE 1: 28-29
w Thread tension: AUTO
e Presser foot: Automatic buttonhole foot R
r Foot pressure: 5
The sewing procedure is the same as the square
buttonhole (refer to pages 44-46).
The machine will sew a buttonhole in the order shown.
q Starting point
NOTE:
The buttonhole width can be adjusted from 2.5 to 7.0.
The stitch density can be adjusted from 0.5 to 1.0 for
pattern 28 (mode 1), 0.5 to 2.5 for pattern 29 (mode
1). If the stitch balance of the left and right row is not
even, correct it by turning the feed balancing dial (refer
to page 77).
q
q
e
w
r
q
e
w
r
Bekijk gratis de handleiding van Elna eXcellence 580+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | eXcellence 580+ |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 0 MB |
