Elna eXcellence 580+ handleiding
Handleiding
Je bekijkt pagina 51 van 88
49
Corded Buttonhole
Machine settings
q Pattern: MODE 1: 24
w Thread tension: AUTO
e Presser foot: Automatic buttonhole foot R
r Foot pressure: 5
z Use the same procedure as the square buttonhole
procedure. Set the stitch width to match the thickness
of the cord used. With the buttonhole foot raised,
hook the ller cord on the spur q at the back of the
buttonhole foot.
Bring the ends toward you under the buttonhole foot,
clearing the front end. Hook the ller cord into the
forks w on the front of the automatic buttonhole foot
to hold them tight.
Lower the needle into the garment where the
buttonhole will start, and lower the foot.
q Spur
w Forks
x Lower the buttonhole lever.
Pull the needle thread lightly to the left.
Start the machine and sew the buttonhole. Each side
of the buttonhole and the bartacks will be sewn over
the cord.
Remove the fabric from the machine, and cut the
sewing threads only.
c Pull the loose ends of the ller cord to tighten it.
Thread the each end of the cord through a hand-
sewing needle. Then draw the both ends to the wrong
side of the fabric and knot.
NOTE:
Cut the ller cord at both ends, if the ller cord is
stitched on the fabric and cannot be pulled.
q
e
w
r
w
q
z
x
c
Bekijk gratis de handleiding van Elna eXcellence 580+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | eXcellence 580+ |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 0 MB |
