Eliet Cameleon handleiding
Handleiding
Je bekijkt pagina 28 van 37
28
Nederlands
11.3 Maintenance after 20 hours of operation
11.3.1 General lubrication treatment
For proper operation of the machine it is recommended to lubricate it at regular intervals.
Lubricate hinges and friction points.
Lubricating nipples
Caution:
As for other maintenance, the engine must be switched off and the spark plug
removed before performing any lubricating activities Protective gloves must be
worn.
Lubricate via available nipples.
The swivel caster at the front of the Cameleon M 360-M 450 contains a
lubricant nipple.
How to proceed:
• Clean the nipple.
• Push new lubricant through the nipple with a special lubricant pump.
• ELIET recommends Sunoco Multi Purpose Grease.
• One or two pump-fulls will suffice to redistribute the new grease.
• Remove the grease that protrudes via the seams.
Lubricating hinges
Hinges can be found in these locations:
The pivot point of the skip.
The pivot point of the latch on the collector unit.
The pivot point of the supporting arm.
• Start by spraying some penetrating oil into the hinges. Allow it to sit for a while.
• Then wipe away old lubricant with a cloth or paper tissue.
• Once the hinges have been cleaned, spray them with Novatio White Supreme Grease.
• All lubricants indicated are available from your ELIET dealer.
Bekijk gratis de handleiding van Eliet Cameleon, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eliet |
| Model | Cameleon |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2919 MB |
