Elektron Tonverk handleiding
Handleiding
Je bekijkt pagina 97 van 110
APPENDIX A: MACHINES
97
HPF
HPF sets the cuto frequency of the reverb high-pass filter that aects the audio going into the reverb.
LPF
LPF sets the cuto frequency of the reverb low-pass filter that aects the audio going into the reverb.
MIX
Dry/Wet sets the mix between the dry signal and the aected signal. This parameter is only available if
the eect is used on a Bus track or the Mix track.
A.3.18 WARBLE
The Warble eect helps you recreate a sound similar to that of an old tape recorder by adding a pitch
warble eect, along with audio and noise filtering.
SPEED
Sets the speed of the warble eect: A setting of 0 makes the speed random.
DEPTH
Sets the depth of the warble eect.
BASE
Sets the base frequency of the filter.
WIDTH
Sets the frequency width above the base frequency.
N.LEV
Noise Level sets the amount of noise that is added to the eect. Please note that the noise level is not
aected by the MIX setting.
N.HPF
High-pass filter sets the frequency for the high-pass filtering of the noise.
STEREO
Stereo Width sets the amount of the warble eect in the stereo field.
MIX
Dry/Wet sets the mix between the dry signal and the aected signal.
Bekijk gratis de handleiding van Elektron Tonverk, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elektron |
| Model | Tonverk |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15555 MB |