Elektron Tonverk handleiding

110 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 87 van 110
APPENDIX A: MACHINES
87
MIX
Dry/Wet sets the mix between the dry signal and the aected signal.
A.3.3 COMB ± FILTER
This stereo comb filter with built-in modulation introduces metallic-sounding, pitch-tuned, resonant over-
tones.
SPD
Modulation Speed controls the frequency of a built-in triangle LFO. It is tempo-synced and the values
are measured in sequencer steps.
DEP
Modulation Depth controls the amount of frequency modulation applied from the LFO to the comb
filter.
SPH
LFO Start Phase controls the triggering behavior of the LFO. The parameter value OFF indicates that
it will run free. Other values will cause the LFO to retrigger from that phase position every time a note
is played on the track.
DTUN
Detune osets the frequency of the comb filter in the left and right channels.
FREQ
Frequency sets the resonant frequencies of the comb filter. It can be set to both positive and negative
values.
FDBK
Feedback sets the gain of the feedback signal. Please be aware that setting FDBK to a high value can
create a very loud sound.
LPF
Low-pass Filter sets the cuto frequency of the low-pass filter in the feedback signal.
MIX
Dry/Wet sets the mix between the dry signal and the aected signal.
A.3.4 COMPRESSOR
The compressor eect compresses the dynamic range of the signal by reducing the volume of loud
sounds relative to the quiet sounds.

Bekijk gratis de handleiding van Elektron Tonverk, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkElektron
ModelTonverk
CategorieNiet gecategoriseerd
TaalNederlands
Grootte15555 MB