Elektron Tonverk handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110/ 110

Afdrukken

Je bekijkt pagina 62 van 110

14. SEND FX TRACK PARAMETERS

62

14. SEND FX TRACK PARAMETERS

The parameters that are available on the Send FX tracks are explained in this chapter. For more informa-

tion about Send FX tracks, please see ”5.3.4 SEND FX TRACKS (TRACK 13–15)” on page 20. On the FX

parameter pages, you have parameters for selecting and editing the Send FX track’s FX machines. On the

MOD pages, you have two LFOs dedicated as modulation sources for the track’s parameters.

14.1 EDITING THE SEND FX TRACK PARAMETERS

Press [TRK] + [TRIG 13–15] to select the Send FX track you want to edit. There are three PARAMETER

pages for the SEND FX tracks. Press [TRIG], [FX], and [MOD] to access the tracks PARAMETER page

groups. Use the [UP]/[DOWN] keys to access the parameter group’s pages. You can also press a [PARAM-

ETER PAGE] key repeatedly to cycle through that group’s parameter pages. Press and hold a [PARAME-

TER PAGE] key to see the values for all parameters on that page.

The track parameters can be locked to other settings at any step of the pattern by first pressing and hold-

ing the [TRIG] key, then adjusting the parameter settings with the DATA ENTRY knobs. For more informa-

tion, please see “10.10.1 PARAMETER LOCKS” on page 40.

If you press [TRIG 13–15] to select a Send FX track without first pressing and holding [TRK],

you can still use the [KEYBOARD] to play the previously selected audio track.

14.2 TRIG PAGE

Here you set the options for notes that are trigged. This is also where you select trig conditions. Press the

[TRIG PARAMETERS] key to access the menu. Change settings using the DATA ENTRY knobs. These

general settings aect note trigs placed on the sequencer.

NOTE

Trig Note sets the pitch of the note when trigged. When in LIVE RECORDING mode and using the [KEY-

BOARD] to enter notes, the pitch of the [TRIG] keys played will override this setting. The NOTE parame-

ter is not available for tracks that have the Subtracks SRC machine assigned.

VEL

Trig Velocity sets the velocity of the sequencer’s note trigs.

LEN

Trig Length sets the length of the note trig. In LIVE RECORDING mode, the duration of pressing the

[TRIG] keys overrides this general setting.

PROB

Trig Probability sets the probability that the trigs on the track play or not. The probability outcome is

re-evaluated every time a trig is set to play. The default setting is 100%, meaning that all the trigs on the

track play every time. This parameter can be parameter locked, which lets you give separate trigs their

own probability.

RTRG

Retrig enables multiple trig repeats on placed trigs. Use DATA ENTRY knob A to turn retrig on or o. For

information on setting retrig locks on specific trigs in the sequencer, please see “10.7 RETRIGS” on page

39.

RTIM

Repeat Time sets the retrig rate. 1/16 is the nominal retrig rate, one trig per step. 1/32 corresponds to two

trigs per step and so on. To do triplets, for example, set the retrig rate to 1/12 (or 1/24).

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110/ 110

Bekijk gratis de handleiding van Elektron Tonverk, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd