Elektron Tonverk handleiding
Handleiding
Je bekijkt pagina 59 van 110
13. BUS TRACK PARAMETERS
59
13. BUS TRACK PARAMETERS
The parameters that are available on the Bus tracks are explained in this chapter. For more information
about Bus tracks, please see”5.3.3 BUS TRACKS (TRACK 9–12)” on page 20. On the SRC, FLTR, and
AMP PARAMETER pages, you will find parameters for when using the Bus track to control external MI-
DI-controlled devices (if you have assigned a MIDI SRC machine to the track). For more information about
these parameters, please see “A.2.4 MIDI” on page 82. On the FX parameter pages, you have param-
eters for selecting and editing the Bus track’s FX machines, setting the send levels from the track to the
send FX, and also setting the track routing. On the MOD pages, you have two LFOs dedicated as modula-
tion sources for the track’s selected FX machines.
13.1 EDITING THE BUS TRACK PARAMETERS
Press [TRK] + [TRIG 9–12] to select the Bus track you want to edit. There are six PARAMETER pages for
the Bus tracks. Press [TRIG], [SRC], [FLTR], [AMP], [FX], and [MOD] to access the tracks PARAMETER
page groups. Use the [UP]/[DOWN] keys to access the parameter group’s pages. You can also press a
[PARAMETER PAGE] key repeatedly to cycle through that group’s parameter pages. Press and hold a [PA-
RAMETER PAGE] key to see the values for all parameters on that page.
The track parameters can be locked to other settings at any step of the pattern by first pressing and hold-
ing the [TRIG] key, then adjusting the parameter settings with the DATA ENTRY knobs.For more informa-
tion, please see “10.10.1 PARAMETER LOCKS” on page 40.
If you press [TRIG 9–12] to select a Bus track without first pressing and holding [TRK], you
can still use the [KEYBOARD] to play the previously selected audio track. Selecting the same
Bus track again toggles editing back to the audio track.
13.2 TRIG PAGE
Here you set the options for notes that are trigged. This is also where you select trig conditions. Press the
[TRIG PARAMETERS] key to access the menu. Change settings using the DATA ENTRY knobs. These
general settings aect note trigs placed on the sequencer.
NOTE
Trig Note sets the pitch of the note when trigged. When in LIVE RECORDING mode and using the [KEY-
BOARD] to enter notes, the pitch of the [TRIG] keys played will override this setting. The NOTE parame-
ter is not available for tracks that have the Subtracks SRC machine assigned.
VEL
Trig Velocity sets the velocity of the sequencer’s note trigs.
LEN
Trig Length sets the length of the note trig. In LIVE RECORDING mode, the duration of pressing the
[TRIG] keys overrides this general setting.
PROB
Trig Probability sets the probability that the trigs on the track play or not. The probability outcome is
re-evaluated every time a trig is set to play. The default setting is 100%, meaning that all the trigs on the
track plays every time. This parameter can be parameter locked, which lets you give separate trigs their
own probability.
RTRG
Retrig enables multiple trig repeats on placed trigs. Use DATA ENTRY knob A to turn retrig on/o. For
information on setting retrig locks on specific trigs in the sequencer, please see “10.7 RETRIGS” on page
39.
Bekijk gratis de handleiding van Elektron Tonverk, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elektron |
| Model | Tonverk |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15555 MB |