Elektron Tonverk handleiding
Handleiding
Je bekijkt pagina 54 van 110
12. AUDIO TRACK PARAMETERS
54
REL
Release Time sets the length of the release phase of the amp envelope. This parameter is only available
if ENVELOPE MODE in the TRACK SETUP menu is set to ADSR.
OVER
Overdrive sets the amount of overdrive and clipping distortion of the signal entering the filter.
PAN
Pan positions the audio of each voice in the stereo field. The knob function is bipolar with 0 being the
balanced midpoint, L64 sends all sound to the left channel and R63 sends all sound to the right.
VOL
Volume sets the volume amount of the amplifier. Unlike the track level (LEV), this parameter can be
parameter locked and is saved with the preset. For the Subtracks machine, this parameter sets the amp
level for every separate subtrack.
Press [TRIG] + [AMP] to access the TRACK SETUP menu and use the ENVELOP MODE
setting to select if you want the AMP envelope to be in ADSR or AHD mode.
12.8 FX PAGE 1 (TRACK ROUTING)
The FX parameter page 1 contains parameters that sets the routing of the track and the send levels from
the track to the Send FX.
SND1–3
Send 1–3 sets the amount of sound sent through to Send FX 1–3. For more information, please see “14.
SEND FX TRACK PARAMETERS” on page 62.
ROUT
Routing selects where to route the audio of the selected track. This parameter mirrors the setting in the
ROUTING menu. The routing switches for this parameter are shown with “A” in the sound architecture
illustrations. For more information, please see “4. TONVERK SOUND ARCHITECTURE” on page 17,
and “4.4 THE ROUTING MENU” on page 17.
• MIX AB is the default setting and routes the audio to the MIXER and then through the Mix FX to the
A/B outputs and the Headphoness.
• OUT CD routes the audio directly to the C/D outputs.
• OUT EF routes the audio directly to the E/F (HEADPHONES) outputs.
• BUS 1–4 routes the audio to Bus 1–4.
12.9 FX PAGE 2 (INSERT FX 1/2)
The parameters on the FX page 2 control the audio track’s selected first insert FX machine. Press [FUNC]
+ [FX] to select FX machine. The parameters vary depending on which FX machine is assigned. For more
information, please see “A.3 FX MACHINES” on page 85.
12.10 FX PAGE 3 (INSERT FX 2/2)
The parameters on the FX page 3 control the audio track’s selected second insert FX machine. Press
[FUNC] + [FX] to select FX machine. The parameters vary depending on which FX machine is assigned.
For more information, please see “A.3 FX MACHINES” on page 85.
Bekijk gratis de handleiding van Elektron Tonverk, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elektron |
| Model | Tonverk |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15555 MB |