Elektron Tonverk handleiding
Handleiding
Je bekijkt pagina 45 van 110
10. THE SEQUENCER
45
• [FUNC] + [RECORD] copies the selected row.
[FUNC] + [STOP] pastes a previously copied row to the selected row.
[FUNC] + [PLAY] resets the selected row to the pattern’s default BPM, length, and mute.
[FUNC] + [UP] deletes the selected row.
[SONG] + [LEFT] will cue the selected row and enable row-loop.
[FUNC] + [SONG] toggles the SONG mode on/o.
• The TEMPO page will display the song’s BPM, unless the playing/cued row has a non-
blank value, in which case it will display the row’s value.
• Please note that there is always a row called END at the song’s end. This row can be set
to either STOP the song or LOOP it from the beginning and play it again.
• On the SONG EDIT screen, you can select a song row number and then press YES to
move the playhead to this row. You can also use the [TRIG 1–16] keys to preview and
play the track presets from the pattern on the playhead row.
10.11.3 PLAYING A SONG
1. Press [SONG] and then press [TRIG 1–16] to select a song and enter SONG mode. The song selected
will be the one that was last played or edited.
2. Press [PLAY] to play the selected song. At the top of the screen, you see the song number, the row
currently playing, the total number of rows in the song, the row’s LABEL, and finally the patterns bank/
number. Here is also a progress bar to indicate how far the song pointer has progressed in the row.
3. Press [STOP] to stop the playback. You can then press [PLAY] to continue to play the song from the
current playhead position. Press [STOP] twice to move the playhead to the song’s beginning.
4. To exit song mode, press [PTN] + [TRIG 1–16] to return to pattern mode.
• Press [SONG MODE] + [LEFT] (when in SONG mode) to loop the currently playing row.
Press [SONG MODE] + [LEFT] again (when in SONG mode) to stop looping the row and
return to normal song playback.
• Press [SONG MODE] + [UP]/[DOWN] (when in SONG mode) to select a specific song row
to jump to and to play next.
• Press [PTN] and the [TRIG 1–16] keys to select a pattern to exit SONG mode and return to
regular pattern play.
The songs are automatically saved as they are created and edited. However, you must save
the project if you wish to keep the songs before switching to another project.
10.12 PERFORM MODE
In PERFORM mode, any changes made to the preset parameters in the pattern are kept in a temporary
memory location. It means you can keep your parameter tweaks as long as you are in PERFORM mode, but
when you exit PERFORM mode, the pattern reloads to its previously saved state. You can only be in PER-
FORM mode on one pattern at a time. If you are in PERFORM mode on one pattern and switch to another,
the PERFORM mode will remain active on the first pattern when you return to it. However, if you enter PER-
FORM mode on the second pattern, you lose the PERFORM mode tweaks made to the first pattern.
Press [FUNC] + [TRK] to toggle PERFORM mode on/o. The [TRK] key is lit green when PRFORM mode
is active
Actions done in PERFORM mode are not saved and will not remain when switching the device
o. Saving the pattern will not save any changes done in PERFORM mode.
Bekijk gratis de handleiding van Elektron Tonverk, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elektron |
| Model | Tonverk |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15555 MB |