Elektron Tonverk handleiding
Handleiding
Je bekijkt pagina 35 van 110
10. THE SEQUENCER
35
10. THE SEQUENCER
Tonverk’s sequencer stores its information in patterns. A pattern controls the playback of the tracks and
various pattern-specific aspects of the tracks. Patterns are stored in projects. A project contains eight
banks (A to H), each with 16 patterns, resulting in 128 patterns available for each project.
A pattern contains:
• General trig settings on the TRIG page (default note pitch, velocity, etc.).
• The settings on the PARAMETER pages.
• The settings in the SETUP menu.
• Quantization settings.
• Note trigs and Lock trigs for all tracks.
• Parameter locks.
• Length and time signature for the tracks.
10.1 PATTERN OPERATIONS
Tonverk can seamlessly switch between patterns. Together with the ability to chain patterns, this is a handy
feature when improvising live. For more information, please see “10.1.3 CHAINS” on page 35.
10.1.1 SELECTING BANK AND PATTERN
Press [PTN] and then use the [SUBTRACKS] keys to select a bank (if you want to choose a pattern from
another bank than the current). Then press [TRIG 1–16] to select a pattern.
If you just want to choose a pattern within the current bank, press [PTN] + [TRIG 1–16].
Press [PTN] or [NO] to exit bank/pattern selection.
White [TRIG] keys indicate pattern positions that contain data. A red [TRIG] key indicates the current
active pattern. Empty patterns are unlit.
When a pattern is playing, and a new pattern is selected, the new pattern number will be shown flashing
in the upper left corner of the screen. Once the last step of the pattern has played, the new pattern will
begin, and the pattern number will stop flashing.
• Patterns can be changed while the sequencer is running.
• Patterns can be changed and queued by sending program change messages.
10.1.2 PATTERN CONTROL
Press [PLAY] to start the playback of a pattern. Press [STOP] to stop the playback of all tracks. The
sound will be cut o, but eects like Delay will continue to be audible until the delay repeats have faded
out. Quickly press [STOP] + [STOP] to stop playback of all tracks and get just a short fade out of the
send eects.
When a pattern is playing, press [PLAY] to pause the playback. Press [PLAY] to resume the playback.
If a pattern contains more than 16 sequencer steps, the small square boxes at the top of the screen will
indicate this. When a pattern is playing, the active pattern page is shown with a blinking unfilled square.
10.1.3 CHAINS
Chains are sequences that consist of more than one pattern. You can use chains to preselect and auto-
mate the order in which you want your patterns to play.
You can create one chain and use any pattern in bank A–H. The chain can consist of up to 64 patterns.
1. Ensure you are in the SEQUENTIAL TRANSITION mode. You can only create chains in this mode.
For more information, please see “10.1.4 TRANSITION MODE” on page 36.
2. Press [PTN] to enter the pattern selection.
Bekijk gratis de handleiding van Elektron Tonverk, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elektron |
| Model | Tonverk |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15555 MB |