Elektron Tonverk handleiding
Handleiding
Je bekijkt pagina 20 van 110
5. OVERVIEW OF THE TONVERK STRUCTURE
20
5.3.1 MACHINES
A machine is a module within Tonverk that has specific functionality. A machine can be replaced with
another machine of the same category. For example, dierent audio sample playback engines
(SRC machines) or a selection of eects (FX machines). Every machine has a specific set of parameters
tailored to give you the most useful sound-shaping possibilities for that particular machine. For more
information, please see “APPENDIX A: MACHINES” on page 79.
5.3.2 AUDIO TRACKS (TRACK 1–8)
Tracks 1–8 can be used as audio tracks. This is the default setting for these tracks. Each audio track
contains a preset. The preset contains the settings in the PARAMETER pages (SRC, FLTR, AMP, FX, and
MOD), the settings in the PRESET SETUP menu, and the ARPEGGIATOR menu. Tracks 1–8 can also be
used with a MIDI SRC machine, which then converts the audio track into a MIDI track. Each audio track
has two insert eect slots, separate sends to the three send eects, two voice LFOs, a modulation enve-
lope, and two FX LFOs dedicated as modulation sources for the track’s selected FX machines
5.3.3 BUS TRACKS (TRACK 9–12)
A bus lets you route multiple tracks into one channel to process them simultaneously—you can use
one signal chain to aect an entire group of tracks, adding eects, and adjusting the level for the whole
group. Tonverk has four separate buses, each with its own sequencer track. Each bus has two insert
eect slots, separate sends to the three send eects, and two LFOs. The bus tracks can also simultane-
ously function as MIDI tracks, using the parameters on the SRC, FLTR, and AMP pages.
5.3.4 SEND FX TRACKS (TRACK 13–15)
Tonverk has three Send FX tracks. For each track, you can select an FX machine that will be one of the
pattern’s Send FXs. You also have two LFOs on each track, dedicated as modulation sources for the
track’s selected FX machine.
5.3.5 MIX TRACK (TRACK 16)
Tonverk also has a Mix track. This track allows you to control the Mixer parameters, including track levels
and audio input settings. Here, you can select an FX machine to be the pattern’s main FX. You also have
two LFOs on the track dedicated as modulating sources for the selected FX machine.
5.3.6 MIDI TRACKS (TRACK 1–12)
The MIDI tracks function almost identically to the audio tracks. Parameter locks, LFO modulation, and
copy/paste commands are available. Each MIDI track also features micro timing, individual track length,
and time signature settings. The primary dierence is that the MIDI tracks do not generate sound; in-
stead, the sequencer data is transmitted through the MIDI OUT or USB ports.
Any of the tracks 1–12 can be used as a MIDI track. They are used to control external, MIDI-equipped
gear. Each MIDI track can trigger up to 16 notes per step with adjustable parameters, including velocity
and length, as well as control pitch bend and aftertouch. Additionally, 16 freely assignable MIDI control
change parameters (MIDI CCs) are available. For more information, please see “A.2.4 MIDI” on page
82. Any MIDI channel can be assigned to a MIDI track, and several tracks can share the same chan-
nel. If several tracks are assigned to the same MIDI channel, the track with the lowest number has priori-
ty in the event of parameter conflicts.
To use tracks 1–12 as a MIDI track, you must first assign a MIDI machine to it.
1. Press [FUNC] + [SRC] to open the MACHINE menu.
2. Use [UP]/[DOWN] to select the MIDI machine, and then press [YES] to assign it to the track.
• If you select a MIDI machine for a Bus track (tracks 9–12), the Bus track doubles as a
MIDI track, with both the MIDI and bus-related parameters available.
• Both Audio- and Bus tracks retain their selected FX machines even if you assign a MIDI
SRC machine to the track.
5.3.7 SELECTING TRACKS
Press [TRK] + [TRIG 1–16] to select a track without triggering the track’s preset (if it is an audio track).
When not in any recording mode, press [TRIG 1–16] to select a track and trigger its preset (if it is an
audio track). If you select track 9–16 and your previously selected track was an audio track, the [KEY-
BOARD] still plays the previously selected audio track.
The complete track preset, with all its parameter settings may be copied to another track
(if the selected target track is in the same track type (Audio/MIDI tracks, Bus tracks, Send
FX tracks). Press [TRK] + [TRIG 1–16] + [RECORD], and then press [TRK] + [TRIG 1–16] +
[STOP] to paste the preset to the selected track.
Bekijk gratis de handleiding van Elektron Tonverk, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elektron |
| Model | Tonverk |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15555 MB |