Elektron Tonverk handleiding
Handleiding
Je bekijkt pagina 18 van 110
4. TONVERK SOUND ARCHITECTURE
18
4.4.1 ROUTING TRACKS
1. Press [FUNC] + [MUTE] to open the ROUTING menu.
2. Use [UP]/[DOWN] to select the track group you want to view (tracks, buses/send FX).
3. Use the [TRIG] keys to select the track you want to route, and then use LEVEL/DATA to select a
routing destination.
4. Press [NO] to exit and close the ROUTING menu.
The possible routing destinations vary depending on the track type/source.
• Audio track sound destinations: MIX AB, OUT CD, OUT EF, BUS 1–4
Routing switches are shown with “A” in the sound architecture illustrations above.
• Bus track sound destinations: MIX AB, OUT CD, OUT EF
Routing switches are shown with “B” in the sound architecture illustrations above.
• Send FX track sound destinations: MIX AB, OUT CD, OUT EF,
Routing switches are shown with “C” in the sound architecture illustrations above.
• The MIX AB destination is always routed (through the main FX) to outputs A/B. It is also,
by default, routed to outputs E/F (Headphones). The level of the signal to E/F (Head-
phones) can be set on the MIX track’s FLTR page using the HP.MON parameter. This level
control is indicated by the letter “E” in the sound architecture illustrations above.
• You can also use a key combination to route the track to dierent destinations in the
ROUTING menu. Press and hold the [TRIG] key(s) for the track(s) you want to route, then
press the [TRIG] key representing the routing destination. The OUT CD and OUT EF desti-
nations is selected with [KEYBOARD A] and [KEYBOARD B] respectively.
• The external audio inputs can also be routed to several destinations: MIX AB, OUT AB,
OUT CD, OUT EF, BUS 1–4, TRK 1–8. However, these settings can only be performed on
the SRC page of the Mix track, and not in the ROUTING menu. Routing switches for the
external inputs are indicated by the letter “D” in the sound architecture illustrations above.
• The two sources of external audio input, audio over USB and audio from the IN A/B inputs,
are merged, processed, and treated as a single source of input.
• When selecting a track as a destination for the external inputs, the audio is routed directly
to the insert eects and not through the track’s overdrive, filters, or amp.
Bekijk gratis de handleiding van Elektron Tonverk, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elektron |
| Model | Tonverk |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15555 MB |