Electrolux WASL3IE5R0 handleiding
Handleiding
Je bekijkt pagina 24 van 244
10.4 AutoDose configuration mode
Enter the AutoDose configuration mode
before proceeding with any programme
setting. The configuration mode may
cancel temporary settings .
1. Press the On/Off button for a few
seconds to activate the appliance.
2. Wait about 10 seconds for appliance
internal check.
3. To enter in configuration mode, hold
pressed the Temperature and the Spin
buttons simultaneously for a few seconds
until
and the blinking detergent
tank and softener tank indicators
appear in the display. After 10 seconds
without interacting with control panel the
appliance exits the configuration mode.
4. Touch related tank buttons to toggle
function off and on. The display shows
OFF when a tank is disabled or shows
tank indicator when it is enabled.
5. To set basic dosage touch related tank
buttons until default dosage laundry
product and two arrows on bottom of
display appear. Touch the Temperature
button repeatedly to decrease the dosage
and the Spin button to increase it:
minimum step is 1 ml (each single step)
or 10 ml (when button is hold pressed).
6. After about 10 seconds the display
returns to the programme information
screen or hold pressed the Temperature
and the Spin buttons again to exit
immediately.
10.5 Filling the detergent and
additives on AutoDose system
Please read "Detergents and other
treatments" in "Hints and tips" chapter.
We recommend that you do not exceed
the maximum indicated level ( ).
1. Open the detergent dispenser.
2. Lift up the AutoDose cover lid.
24 ENGLISH
Bekijk gratis de handleiding van Electrolux WASL3IE5R0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | WASL3IE5R0 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 24591 MB |
