Electrolux WASL3IE5R0 handleiding

244 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 23 van 244
super compact detergent you may need to
reduce the pre-set dosage considerably.
If the washing results are not satisfying or
there is too much foam during washing, you
may need to change the factory setting. Read
in the paragraph 'AutoDose configuration
mode' how to change the basic setting, but
before:
1. Identify the water hardness level.
Check the water hardness level in your
area. The levels are generally indicated
as: soft, medium and hard.
If necessary, please contact your local
water authority to check the water
hardness in your area.
2. Identify the customized detergent
dosage.
Check the label in the detergent/fabric
softener container and identify the
quantity to use. For the detergent the
suggested quantity of detergent is the
combination of three different factors:
Water hardness level (see the
following table);
Normal soil level;
Rated capacity of the appliance (e.g.
maximum load capacity 10.0 kg). If the
rated capacity on the detergent
container label refers to lower capacity
appliances, the customized dosage
should be increased by 20% referring
to the proposed dosage.
As example for a ma‐
chine with rated capacity
8 kg, medium water, nor‐
mal soil level the dosage
is recognised by the
crossing in the detergent
label dosages.
3-5kg 5-8kg 8+kg
Water hardness levels
Levels Water hardness range
°f
1)
°d
2)
°e
3)
mmol/l ppm
Soft <15 <8 <10 <1.4 <140
Medium
4)
15 - 25 8 - 14 0 - 17 1.5 - 2.5 150 - 250
Hard >25 >14 >17 >2.5 >250
1)
French degrees
2)
German degrees
3)
English degrees
4)
Factory setting, able to satisfy most of the use conditions.
ENGLISH 23

Bekijk gratis de handleiding van Electrolux WASL3IE5R0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkElectrolux
ModelWASL3IE5R0
CategorieWasmachine
TaalNederlands
Grootte24591 MB