Electrolux EWW1242R9SC handleiding
Handleiding
Je bekijkt pagina 48 van 72
48 ENGLISH
After some minutes from the end
of the programme, the energy saving
function deactivates the appliance
automatically.
After drying phase, clean the drum,
the seal and the inside of the door with
a wet cloth.
15.4 At the end of the drying
programme
• The appliance stops automatically.
• The acoustic signals operate (if they
are active).
• You can remove the laundry and not
performing the anti-crease phase. We
recommend, for better results, that you
remove the laundry when the phase is
almost completed.
In the display appears the indicator of
the Start/Pause to finish the drying
phase and remove items.
The door locked goes off and the
door unlocks.
If Start/Pause will not tapped, the
appliance continues automatically to
operate with the anti-crease phase for
approximately 30 minutes.
The anti-crease phase is
recommended to reduces creasing.
• The display indicates that the anti-
crease phase is done and items could
be removed.
• Press the On/Off button for some
seconds to deactivate the appliance.
1. Remove the laundry from the
appliance.
2. Make sure that the drum is empty.
2. Press button Start/Pause to start
the programme.
In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.
Bekijk gratis de handleiding van Electrolux EWW1242R9SC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EWW1242R9SC |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 7059 MB |
