Electrolux EWW1043R7SC handleiding
Handleiding
Je bekijkt pagina 27 van 50
ENGLISH 27
1. Ensure that the electrical and
water connections comply with the
installation instructions.
2. Put 2 litres of water in the detergent
compartment for washing phase. This
activates the drain system.
3. Select a Cottons cycle at 90 °C,
without any laundry in the machine,
to remove any manufacturing residue
from the drum and tub then start the
machine.
During installation or before first
use you may observe some water in the
machine. This is a residual water left in
the machine after a full functional test
in the factory to ensure the machine
is delivered to customers in perfect
working order and is no cause for
concern.
The Figures that take place in this
manual are schematic and may not
correspond exactly with your product.
If the subject parts are not included in
the product you have purchased, then it
is valid for other models.
9. BEFORE FIRST USE
10. DAILY USEWASHING ONLY
10.1 Loading The Laundry
1. Turn the water tap on.
2. Connect the main plug to the main
socket.
3. Press the On/Off touch key to turn on
the machine. Turn the knob to set a
programme. The machine will propose
a temperature and automatically
select the spin speed provided for the
programme you have chosen.
The selector knob can be turned either
clockwise or counter-clockwise.
4. Check and remove objects (if there are
any) that could be trapped in the fold.
5. Place the laundry in the drum, one
item at a time, shaking them out as
much as possible. (Refer to chapter
"WASHING HINTS", page 34)
6. Close the door.
WARNING!
Make sure that no laundry remains
between the seal and the door.
Bekijk gratis de handleiding van Electrolux EWW1043R7SC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EWW1043R7SC |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4970 MB |
