Electrolux EW9W216BW handleiding
Handleiding
Je bekijkt pagina 26 van 96
With the flap in the position DOWN:
• Do not use gelatinous or thick
liquid detergents.
• Do not put more liquid detergent
than the limit shown on the flap.
• Do not set the prewash phase.
• Do not set the delay start function.
5. Measure out the detergent and the fabric
conditioner.
6. Carefully close the detergent dispenser.
Make sure that the flap does not cause a
blockage when you close the drawer.
11.3 Additional information about
daily use
The SensiCare System load detection
After touching the Avvio/Pausa button the
SensiCare starts the laundry load detection to
achieve perfect washing results in the
minimum possible time. After about 15
minutes the display shows the new
programme duration that could increase or
decrease.
The SensiCare detection is carried out
with complete washing programmes only
and is not available with some
programmes..
Starting a programme
Touch the Avvio/Pausa button to start the
programme. The related indicator stops
flashing and stays on. The programme starts,
the door is locked. The display shows the
indicator .
Starting a programme with delay start
1. Touch the Partenza Ritardata button
repeatedly until the display shows the
desired delay time.
2. Touch the Avvio/Pausa button. The
appliance door locks and starts the
countdown of the delay start. When the
countdown is completed, the programme
starts automatically.
Interrupting a programme and changing
the options
1. When the programme is running, you can
change only some options. Touch the
Avvio/Pausa button.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the Avvio/Pausa button again. The
washing programme continues.
Cancelling a running programme
Press the On/Off button to cancel the
programme and to deactivate the appliance.
Press again to activate the appliance.
Opening the door - adding garments
1. Touch the Avvio/Pausa button. The
indicator goes off.
2. Open the appliance door. If necessary,
add or remove the items.
3. Close the door and touch the Avvio/
Pausa button. The programme or the
delay start continues.
Draining water out after end of cycle
If you have chosen a programme or an option
that does not empty out the water of the last
rinse, you must remember to drain it:
1. If necessary, touch the Centrifuga button
to decrease the spin speed proposed by
the appliance.
2. Touch the Avvio/Pausa button.
3. When the programme is completed and
the door locked indicator
goes off,
you can open the door.
4. Press the On/Off button to deactivate the
appliance.
Stand-by function
The Stand-by function automatically
deactivates the appliance to decrease the
energy consumption.
If you set a programme or an option that
ends with water in the drum, the Stand-
by function doesn't deactivate the
appliance to remind you to drain the
water.
26 ENGLISH
Bekijk gratis de handleiding van Electrolux EW9W216BW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EW9W216BW |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 8771 MB |
