Electrolux EFI974EY6S handleiding
Handleiding
Je bekijkt pagina 19 van 352
Levels
Levels as indi‐
cated on the
tester
1)
Water hardness range
°f
(French
degrees)
°d
(German
degrees)
°e
(English
degrees)
mmol/l ppm
4
2)
C04 22 - 29 12 - 16 16 - 20 2.2 - 2.9 220 - 290
5 C05 30 - 37 17 - 20 21 - 26 3.0 - 3.7 300 - 370
6 C06 38 - 45 21 -25 27 - 32 3.8 - 4.5 380 - 450
7 C07 ≥46 ≥26 ≥33 ≥4.6 ≥460
1)
If supplied with the appliance.
2)
Factory setting, able to satisfy most of the use conditions.
10.3 Refill salt
The water softener function acts through
special resins present in the appliance.
To regenerate the resins and make them
ready to soften the water pour a special salt
in the compartment
Salt
:
1. Open the detergent dispenser.
M
ax
▼
M
a
x
▼
Ma
x
▼
Salt
2. Open the compartment
Salt
.
Max
▼
M
ax
▼
Max
▼
3. Pour the special salt.
Max
▼
Max
▼
Max
▼
SALT
4. Close the salt compartment and the
detergent dispenser.
Regularly check if there is enough salt.
The compartment
Salt
can contain about 600
gr of salt that are sufficient for about two
months if the default water hardness level
(C04) is set and the water softener is
activated during wash phase only. A different
water hardness level or different setting may
increase or decrease the salt consumption.
Refer to 'How to set the water hardness level'
and 'How to set the water softener also during
rinse phase'.
The display shows the message Refill salt at
the end of a cycle when compartment
needs to be refilled with salt, even if a little
salt still remains.
ENGLISH 19
Bekijk gratis de handleiding van Electrolux EFI974EY6S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EFI974EY6S |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 33928 MB |
