Electrolux EFI974EY6S handleiding
Handleiding
Je bekijkt pagina 17 van 352
9. BEFORE FIRST USE
During installation or before first use you
may observe some water in the
appliance. This is a residual water left in
the appliance after a full functional test in
the factory to ensure the appliance is
delivered to customers in perfect working
order and is no cause for concern.
1. Make sure that all transit bolts have been
removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Make sure that there is salt in the
compartment marked by
Salt
and set the
proper water hardness level. Refer to
"How to set the water hardness level".
4. Pour 2 litres of water into the detergent
compartment marked by .
This action activates the drain system.
5. Pour a small quantity of detergent into the
compartment marked by .
6. Set and start a programme for cotton at
the highest temperature without any
laundry in the drum.
This removes all possible dirt from the drum
and the tub.
10. THE WATER SOFTENER (COLOURCARE)
10.1 Introduction
The water contains harsh minerals. The
higher the content of these minerals the
harder the water is.
Hard water can reduce the effectiveness of
the detergent, reduce the softness of fabrics
and contribute towards shrinkage and colour
fading.
This appliance is equipped with a water
softener able to provide the right degree of
water softening to preserve the fabric
integrity, colour brightness and ensuring good
wash performances at low temperature.
The water softener should be adjusted
according to the water hardness of your inlet
water. A correct setting allows to achieve the
best washing results and the maximum
garments protection.
To set the water softener correctly, please
refer to 'How to set the water hardness level'.
The first time you turn the appliance on,
the touch screen proposes different
settings: one on this is Water Hardness
level.
10.2 How to set the Water Hardness
level and activate Water Softener
The appliance allows you to chose between 7
levels corresponding to 7 different ranges of
water hardness.
Depending on the country, the water
hardness is expressed in equivalent scales:
e.g. French degrees (°f), German degrees
(°d), English degrees (°e), mmol/l and ppm.
If necessary, please contact your local water
authority to check the water hardness in your
area.
If you cannot obtain the information by your
local water authority, detect the water
hardness by using the tester supplied with the
appliance documentation.
Check in the "Water hardness levels" table
which is the proper level.
To set the water hardness level:
1. Press the On/Off
button for a few
seconds to activate the appliance.
2. Rotate the dial through the programmes
list until the end to find Settings.
ENGLISH 17
Bekijk gratis de handleiding van Electrolux EFI974EY6S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EFI974EY6S |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 33928 MB |
