Electrolux EED-625 handleiding
Handleiding
Je bekijkt pagina 27 van 52
Installation manual
27
Water-inlet fittings have either 3/4” NH (garden hose) or DN20 (3/4” BSP) threads.
All models except EED-645 have 3/4" NH threaded on all inlet valves.
On EED-645 there are DN20 (3/4” BSP) threaded at position (1), (2) and another one at position 3 which is 3/4” NH
threaded.
To connect 3/4” NH hoses (typical water hoses with garden-hose threads) to DN20 (3/4"BSP) threaded inlet valves
(1) and (2), use the adapter fittings provided in the drum package of the machine.
Use the thread seal tape between the inlet valves and the adapter to prevent water leaks.
CAUTION: ATTEMPTING TO ASSEMBLE UNLIKE THREADS WITHOUT USING AN ADAPTER WILL DAMAGE
THE VALVE THREADS, RESULTING IN LEAKS.
3/4” NH 3/4” NH
DN20 (3/4”BSP) 3/4” NH
DN20 (3/4”BSP)
DN20 (3/4”BSP) 3/4” NH
3/4” NH
fig.X02003
There is also an extra water valve which can be used for hard water if soft water is connected to 1.
This valve can also be used for water re-use from tank.
If pump is used, it is only a water connection without valve.
Water pressure:
Continuous operating pressure: 50–800 kPa / 8–116 psi (0.5-80 kp/cm
2
)
Maximum: 1000 kPa / 145 psi (10 kp/cm
2
)
Recommended: 200–600 kPa / 30–90 psi (2–6 kp/cm
2
)
Recommended water hardness: 3 grains per gallon
Recommended pH-range: 7.0–8.0
Acceptable range for chloride concentration: 0–30 ppm
Note!
If the water pressure is below the minimum value, the wash result can not be guaranteed for certain program.
Bekijk gratis de handleiding van Electrolux EED-625, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EED-625 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4390 MB |
