Electrolux EDSH4944SS handleiding
Handleiding
Je bekijkt pagina 23 van 28
23
TROUBLESHOOTING
NOTE
The control panel will timeout in 4
seconds if the START button is not pressed
after opening the door.
The start button must be pressed to
resume the wash if power is lost and then
restored during a running cycle.
Error codes
ERROR CODE PROBLEM SOLUTION
E10 A low fill has been
detected.
Look for a pinched water supply line, or water
shutoff is not completely opened.
E20; E40; EF0 Clogged filters or a
restricted drain line
has been detected.
Check and clean both filters and sump
area and check for a pinched or blocked
drain hose. If the drain line is attached to a
disposer, check that the knockout plug has
been removed.
E30 A leak or overflow
of water has been
detected in the
bottom pan.
Look for loose connections at the water inlet
valve and ensure the unit is properly leveled.
E50 A problem has been
detected with the
drain or wash motor.
Pressing the cancel button or turning power
off at the breaker for 5 min. should clear this
error code and the unit can be restarted.
Call for service if this does not resolve the
problem.
E60 A problem has been
detected with the
water heating system.
EC0 A problem has been
detected with the
electronic control
system.
Press the cancel button or turn power off at the breaker for 5 minutes for all Error code
instances. If this does not resolve the problem, contact the Electrolux Customer Care Center
at 1-877-435-3287.
User Instruction Code
USER CODE PROBLEM SOLUTION
CLOSE This indicates the
door has been left
open or not properly
latched.
Ensuring the door is properly latched will
clear the display. This does not indicate a
problem with your dishwasher and service will
not need to be contacted.
Touch any button except START or CANCEL
to acknowledge a power alert without
resuming a wash.
If a power outage occurs during a wash
delay, the dishwasher restarts upon power
restoration. When the restart is complete,
upon opening the door, the remaining delay
time countdown shows up in the status
window.
If power is lost during cycle selection, once
power is restored, the control panel lights up
for 3 seconds while the dishwasher starts up.
After start-up completes, cycle selections
can then be made if the door is open.
Bekijk gratis de handleiding van Electrolux EDSH4944SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EDSH4944SS |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 3221 MB |
