Electro-Voice Evolve 90 handleiding
Handleiding
Je bekijkt pagina 24 van 64
24 en | Amplifier DSP EVOLVE 70/90 Portable Column Loudspeaker
2025-03 | 01 |
User manual
Bosch Security Systems, LLC
MIX OUT menu
The MIX OUT menu is used to select which signal(s) should be output at MIX OUT and
which signal should be delivered by the loudspeaker.
– L+R - The left and right signals of all inputs are summed. The sum is output at MIX OUT
and is delivered by the loudspeaker (default).
– L - Only the panned left signal of all inputs is output at MIX OUT. The loudspeaker will
deliver only the right signal.
– R - Only the panned right signal of all inputs is output at MIX OUT. The loudspeaker
will deliver only the left signal.
SPK OUT menu
The SPK OUT setting configures the signal sent to the speaker itself.
– QuickSmart Link connected - SPK OUT and MIX OUT signals are identical (L+R/L/R).
– No QuickSmart Link connected - SPK OUT and MIX OUT signals are contrary (L/R) or
also identical in case of mono system (L+R).
BLUETOOTH menu
The BLUETOOTH menu is used to set the Bluetooth® functionality of the loudspeaker.
ON/OFF - The ON/OFF menu controls whether Bluetooth® functionality is enabled or
disabled on the loudspeaker.
CONTROL PAIR - The CONTROL PAIR menu is used to enable the QuickSmart Mobile app
wireless control and monitoring application. Available options for this selection are: ON or
OFF.
The default is OFF.
AUDIO PAIR - The AUDIO PAIR menu is used to stream audio from your Bluetooth® enabled
device to the loudspeaker system. Available options for this selection are: PAIRING, ON or
OFF.
The default is OFF.
LINKSPEAKERS
The LINKSPEAKERS function allows two EVOLVE loudspeakers to be linked over
Bluetooth® in true wireless stereo for Bluetooth® audio streaming only.
To link two EVOLVE loudspeakers:
1. Pair one of the EVOLVE loudspeakers via Bluetooth® to a mobile device. Refer to Pairing
the QuickSmart Mobile app for pairing instructions.
2. In both EVOLVE loudspeakers, navigate to the BLUETOOTH menu in the Main DSP
menu.
3. In both EVOLVE loudspeakers, select LINKSPEAKERS.
The LCD display will show LINKINGSPEAKERS... while establishing connection
between both EVOLVE loudspeakers. When the connection is established, the menu will
display UNLINKSPEAKERS.
In the BLUETOOTH menu below the LINKING SPEAKERS, the stereo channel selection
will appear.
4. Select the appropriate stereo channel selection for each EVOLVE loudspeaker: L+R
(mono), L, or R.
Note: This is stereo image from the audience's perspective, also known as House L & R.
Bekijk gratis de handleiding van Electro-Voice Evolve 90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electro-Voice |
| Model | Evolve 90 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5266 MB |
