Electro-Voice Evolve 90 handleiding
Handleiding
Je bekijkt pagina 23 van 64
EVOLVE 70/90 Portable Column Loudspeaker Amplifier DSP | en 23
Bosch Security Systems, LLC
User manual
2025-03 | 01 |
TREBLE control
The TREBLE control is used to adjust the high frequency performance of the loudspeaker for
different applications or personal preference. The parameter controls a high shelving filter.
The default is 0dB.
MID control
The MID control is used to adjust the midrange frequency performance of the loudspeaker
for different applications or personal preference.
The default is 0dB.
BASS control
The BASS control is used to adjust the low frequency performance of the loudspeaker for
different applications or personal preference. The parameter controls a low shelving filter.
The default is 0dB.
MAIN GEQ menu (default)
The MAIN GEQ menu is used to adjust the frequency response of the loudspeaker for
different applications or personal preference. There are seven different EQ filters available
centered at the following frequencies: 63, 160, 400, 1.0K, 2.5K, 6.0K & 12K Hz.
The range of each filter is -12dB to +12dB.
The default value for each filter is 0dB.
MAIN PEQ menu
The MAIN PEQ is used to adjust the frequency response of the loudspeaker for different
applications or personal preference. There are seven equalization filters available.
The filter type is selectable between the following:
PEQ - Parametric Equalization Filters shape the sound using peak/dip bell shaped filters
which have three controls.
– Q - Quality Factor defines the bandwidth of the filter. A lower Q provides a wider
bandwidth and a higher Q provides a narrower bandwidth.
– FREQ - selects the center frequency of the EQ filter.
– GAIN - sets the amount of increase or reduction of the equalization filter.
LOW/HI SHELF - Shapes the sound using a shelving type filter that can be applied to the
low frequency or high frequency response using two controls:
– FREQ - sets the center frequency of the filter. For the LOW SHELF filter the GAIN of
the filter tapers off above the frequency selected. For the HIGH SHELF filter the GAIN
of the filter tapers off below the frequency selected.
– GAIN - sets the amount of increase or reduction of the signal below or above the FREQ
setting.
LOW/HI PASS - Pass band filters that shape the sound by only passing signal above or
below the selected frequency.
– FREQ - sets the corner frequency for the pass band filter. For HI PASS filters all
frequencies above the selection will be passed through. Frequencies below the setting
will be tapered off. For LOW PASS filters all frequencies below the selection will be
passed through. Frequencies above the selection will be tapered off.
Bekijk gratis de handleiding van Electro-Voice Evolve 90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electro-Voice |
| Model | Evolve 90 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5266 MB |
