Electro-Voice EVID C10.1 handleiding
Handleiding
Je bekijkt pagina 18 van 32
18 en | Installation and Wiring EVID Ceiling Speaker Systems
2023-07 | 12 | F.01U.177.705
Installation manual
Electro-Voice
EVID C8.2HC and C10.1
In addition to the 8-ohm setting, the power taps are 60 W, 30 W, and 15 W at both 70.7V and
100V, with a 7.5 W tap for 70.7V only.
4.8 Step 8 — Attach the Grille
INSTALLATION NOTE: GRILLE SAFETY FEATURE
EVID grilles features a unique safety tether to prevent the grille from falling if the grille is
removed or comes loose after installation.
First, install the grille’s safety tether by pushing the grille fastener into the hole in the front of
the baffle. Second, press the grille into place until the front of the grille is flush with the rim of
the baffle. Make sure the grille is securely seated to prevent it from vibrating loose.
If you need to remove the grille, the easiest way is to insert two bent paper clips or other
pointed objects into holes in the grille, then apply slow even pressure to pull down on the
grille until that section of the grille comes out slightly. Continue the same procedure around
the perimeter of the grille, loosening a portion at a time until the grille is removed.
1
2
Figure4.17: Attach the grille
Bekijk gratis de handleiding van Electro-Voice EVID C10.1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electro-Voice |
| Model | EVID C10.1 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 2609 MB |
