Electro Harmonix Super Switcher handleiding
Handleiding
Je bekijkt pagina 5 van 16
5
TAP Footswitch:
• Two or more presses on the TAP footswitch updates the BPM setting
for the Super Switcher.
• The TAP footswitch also controls the tempo signal that is output
from the TAP jack.
TUNER Footswitch:
• When the TUNER footswitch is pressed, the Super Switcher sends
the IN signal directly to the TUNER jack.
• When TUNER is active, the Super Switcher’s effects loops and
outputs are muted.
BOOST Footswitch:
• The BOOST footswitch turns ON/OFF the stereo output boost.
• The BOOST circuit is after loop 8.
CTRL 1 Footswitch:
• The CTRL 1 footswitch can be used to switch amp channels, trigger
remote effects etc.
• CTRL 1 can be set normally open or closed.
• CTRL 1 can be set to momentary or latching.
• CTRL 1 can be set as a master bypass button.
CTRL 2 Footswitch:
• The CTRL 2 footswitch can be used to switch amp channels, trigger
remote effects, etc.
• CTRL 2 can be set to normally open or closed.
• CTRL 2 can be set to momentary or latching.
- BOOST AND VALUE KNOBS -
BOOST Knob:
• The BOOST knob is a manual analog control for the switchable
stereo output clean boost.
• At fully counter-clockwise, boost is at unity gain. Turn up the BOOST
knob for a volume boost.
• The maximum gain of the Boost circuit is +20dB.
VALUE Rotary Encoder Knob:
• The VALUE knob is a rotary encoder with a push button. This knob
continuously turns in either direction. VALUE is used to navigate and
edit the Super Switcher’s menus.
• VALUE can be used to edit the BPM of the Super Switcher, change
banks, navigate menus and change settings.
Bekijk gratis de handleiding van Electro Harmonix Super Switcher, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electro Harmonix |
| Model | Super Switcher |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1415 MB |
