Handleiding
Je bekijkt pagina 10 van 23
Page 10 of 23
REMOTE CONTROL
When the heater is plugged in (And switched on using
the power switch on the side), use the ON/OFF button
to turn the appliance on.
Press the POWER button to set whether the heater
produces heat.
On: Appliance will heat when the desired temperature
is above the room temperature. will be displayed
on the appliance.
Off: The heating element is turned off and the unit
will not heat.
The inbuilt timer will allow you to set the unit to turn
on or turn off after a set period of time, please note
only one timer can be used at any time.
This is programmed the same was as the timer on the
unit itself.
Repeatedly press to change the desired room
temperature.
Press to turn on the child lock, and disable to controls
on the heater. Press again to turn off the child lock.
REPLACING THE BATTERIES
The remote control is powered by a Lithium Button Cell Battery (CR2025). Should the remote
become unresponsive, replace the battery following the instructions below:
1. Turn over the remote and press tab A to the right.
2. Slide out the battery tray B.
3. Replace the battery with the same type, ensuring the positive side is facing upwards.
Bekijk gratis de handleiding van ElectriQ VG2TR-1.2BW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | VG2TR-1.2BW |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 2153 MB |
