Handleiding
Je bekijkt pagina 15 van 30
15
PTC HEATER
This air conditioner contains an intelligent 1KW PTC heater, which is especially useful in low-
temperature applications. It provides both a boost to the appliance's heat output and increases the
heat pump's performance in low-temperature conditions by warming the cold coils, preventing the
unit from entering defrost mode. This helps the room reach the desired temperature as quickly as
possible.
As well as warming the inside of the unit, the PTC heater will also provide extra heat to warm the
room, which is expelled out of the unit and into the room
The PTC function can only be activated using the remote control, and once activated, the PTC
HEAT symbol will display on both the appliance and the remote. In order to ensure efficient
operation, the PTC heating element will only activate when the following conditions are met:
1) The unit is in heating mode.
2) The outdoor temperature is below 25°C.
3) The desired room temperature is at least 5°C higher than the current room temperature.
4) The internal temperature of the evaporator coils within the appliance is below 48°C.
5) The compressor is running to increase the room temperature
If any of the above conditions are met while the PTC heater is operating, the PTC heater will turn
off. The PTC function can also be manually turned off by pressing the PTC button on the remote.
Please note: As the electrical heating used in the PTC heater is less efficient than the heatpump,
this feature is not activated when the unit is turned on, and must be reactivated if required each
time the appliance is started.
Bekijk gratis de handleiding van ElectriQ IQOOL-SMART15HP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | IQOOL-SMART15HP |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 2759 MB |
