Handleiding
Je bekijkt pagina 8 van 12
8
SECURING A GAS CYLINDER
1. Position a gas cylinder inside the tank housing.
2. Stick cylinder restraint straps together as RIGHT photo illustrated.
The straps must be in a proper tightness for the gas cylinder.
Caution: Please take care that the cylinder restraint straps. DO NOT strain the regulator assembly.
LEAK TESTING
NEVER USE A NAKED FLAME TO CHECK FOR LEAKS.
NEVER LEAK TEST WHILE SMOKING.
The gas connections on this appliance are leak tested at the factory prior to shipment.
This appliance needs to be periodically checked for leaks and an immediate check is required if the
smell of gas is detected.
• Make a soap solution using 1 part of liquid washing-up liquid to 3 parts water. The soap solution can
be applied with a soap bottle, brush, or rag to the leak tested points shown in the figure.
• The valve of the gas cylinder should be in the OFF position at this point of the leak test. Once the
soapy solution is applied to the gas connections, the valve of the gas cylinder needs to be turned to
the ON position.
• Soap bubbles will begin to form in the soapy solution if a leak is present.
• In case of a leak, turn off the gas supply. Tighten any leaking fittings, then turn the gas supply on and
recheck.
Bekijk gratis de handleiding van ElectriQ EQODHGS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | EQODHGS |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 949 MB |
