Handleiding
Je bekijkt pagina 7 van 25
Page 7 of 25
FEATURES
• 3 Heating Modes
• Tempered Glass Panel
• Easy to Read LED Display
• 24 Hour Timer
• Wi-Fi Enabled with App Control
• Remote Control
• Electronic Sensor Thermostat with Frost Protection Function
• Double Overheat Protection
• Room Temperature Sensor Adjustment
• Wall Mountable or Portable Using Supplied Castors
• Waterproof Rating of IP24
PARTS LIST
2 x Legs
+ 4 Castors
Wall plugs
Screws ᶲ4x12
Screws ᶲ4x35
X3
X6
X3
SETTING THE UNIT UP FOR USE
The appliance can be wall-mounted using the pre-attached mounting brackets, or
alternatively can be set up as a portable heater using the supplied legs with castors. It is
important that the unit is only operated if it is wall-mounted or has the castors fitted.
ATTACHING THE FEET
1. Turn the heater upside down and place it on a soft surface.
2. Put the leg assembly in position and align the screws (φ4x12) with the 3 holes on the
underside of each leg, and loosely fit.
3. Once all screws are in place, they should be fully tightened.
4. After the installation is complete, turn the heater the right way up.
Feet assembly
Bekijk gratis de handleiding van ElectriQ EGH20AWB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | EGH20AWB |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 2074 MB |
