Handleiding
Je bekijkt pagina 16 van 52
1616
OPERATIONS TO BE EXECUTED FOR THE REPLACEMENT OF THE
INJECTORS OF THE OVEN AND GRILL BURNERS
Some models are provided with a set of injectors for the various types of gas.
If the injectors are not supplied they can be obtained from the “Service Centre”.
Select the injectors to be replaced according to the “Table for the choice of the injectors”.
The nozzle diameters, expressed in hundredths of a millimetre, are marked on the body of
each injector.
OVEN BURNER
• Lift and remove the lower panel inside the oven.
• Gently unlock, from the burner, the safety valve probe “V” and the ignition electrode
“E” (as indicated in g. 2.4a). Take care not to damage the probe and the ignition
electrode.
• Unscrew and remove the burner securing screw “A” (g. 2.4a).
• Withdraw the burner as shown in gure 2.4b.
• Using a 7 mm box spanner, unscrew the injector (indicated by the arrow in g. 2.4b)
and replace it with a new one selected in accordance with the “Table for the choice of
the injectors”.
• Regulate the air supply to the oven burner as indicated in the section “REGULATION
OF AIR SUPPLY TO OVEN AND GRILL BURNERS”; then replace the burner and the
other components repeating the above steps in reverse order.
IMPORTANT: Pay special attention to replace correctly the safety valve probe
“V” and the ignition electrode “E” as per gure 2.4a. Check the correct operation
of the safety valve and the ignition electrode.
Anchorage
clip
E
E
V
V
Anchorage
clip
A
Fig. 2.4a
Fig. 2.4b
Bekijk gratis de handleiding van Elba Elio G90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elba |
| Model | Elio G90 |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 5737 MB |
