Elation UNI PAK II handleiding
Handleiding
Je bekijkt pagina 8 van 8
Operation Guide
1. Press the “MENU” button until the letter “A”
appears in the left hand side of the display.
The display will show the “A”followed by the
current address setting. For example, if the
last set DMX channel was 123, your display
should look like our picture to the left.
2. Each tap of the Up or Down arrow buttons will
change the DMX address value once. Pressing
and holding down either the UP or Down arrow
buttons will increase or decrease the DMX
address setting quickly. Once the DMX address
channel is achieve, release the UP or Down arrow
button. The new address setting will automatically
be stored into memory..
5
.8:8:8:8
.8:8:8:8
MENU
MENU
Plug the pack into an appropriate 120V power outlet. Once powered, the Uni
Pak-II will default to its previous function state due to internal memory. In addition,
the digital display will show the last set DMX address setting.
If the power frequency is not stable, the display will show "AC-0". You
will have to connect to a stable power source or wait until the power
becomes stable at the current outlet.
NOTE:
When setting your DMX address, channel
output is disabled.
DMX Addressing
General Information
Operation Guide
1. Press the “Menu” button until the letter “d” or
“S” appear in the left hand side of the display.
2. If your display shows “d”, press the down arrow
button once so it changes to “S”. If the display
already show “S”, proceed to the next step.
3. Press the “Menu” button to enter Switch Pack mode.
6
.8:8:8:8
.8:8:8:8
.8:8:8:8
MENU
MENU
MENU
---
---
Assigning as Switch Pack
Bekijk gratis de handleiding van Elation UNI PAK II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | UNI PAK II |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 955 MB |
