Elation Stage Q handleiding
Handleiding
Je bekijkt pagina 38 van 48
Recording
[ ]5
CHASE STEP CROSS% TIME
- 1 - 50 2S
esc
ok
This menu allows you to set the step length, set a common Cross% and Time for the
chase, and edit the steps as well. Use the F 2, F4 and F 5 faders or Cursor buttons
to set the values for Step(0-48), Cross%(0-100%) and Time(0 to 1 minute and 39.9
seconds).
Next, you can edit the steps from step 1. Use the Channel and Flash 1-12 faders to
create a step(scene), press the Store button to add the step into the current chase.
Proceed in the same way until all steps required have been stored.
Pressing down the Step button allows you to quick access the step. Keep pressing the
Step button, use the Page and Flash 1-12 buttons to select the step to be edited.
Once the chase has been completed, press "ok" to confirm your changes to the chase
and return to the menu.
Now you can choose to continue recording chase or press "esc' to leave this menu.
There are total 48 chase available for the pars. In Record mode, press "Chase",
its LED will light up, you are prompted to select the page and chase, the page
LED will light indicating the current chase page.
Select page and chase number
esc
Recording Chases
A dialog box will appear when you select a chase using the Page and Flash 1-12
buttons. "Esc" will leave this menu.
34
Bekijk gratis de handleiding van Elation Stage Q, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Stage Q |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2570 MB |
