Elation Stage Q handleiding
Handleiding
Je bekijkt pagina 37 van 48
Recording
In Edit menu, use the F4 fader or Cursor UP/DOWN buttons to scroll to [STEP'S
TIME].
esc
ok
[ ]STEP'S TIME
EDIT MENU
Step's Time
Pressing the right arrow button gives access to this setting, a dialog box appears.
ok
[ ]2
SHOW STEP CROSS% TIME
- 1 - 50 2S
This function allows you to set the duration time(Time) and running time(Cross%)
for each step in a Show. Use the Faders 2-4 or Cursor buttons to set the value.
Step indicates the current step number, which ranges between 1 and 48. Time
ranges between 0 and 1 minute and 39.9 seconds. Cross ranges between 0 and 100%.
ok
[ ]GR
SHOW STEP CROSS% TIME
- 1 -
*** ******
You can set several fixtures at one time with the same parameters using Group of
Steps. Keep pressing the Step button, select several steps(indicated by the LEDs)
using Page and Flash 1-12 buttons.
Set the values as the way described hereinbefore. "Ok" confirms and returns to
the Edit menu.
When you have finished recording, press the left arrow button to leave this menu, you
will be prompted to press enter to store what you have record.
quit
<ESC>
Press ENTER to store
Show 01 will be updated!
Press the ENTER button, all the changes to this show will be stored into the memory.
Pressing the F6 button corresponding to <ESC> on the display will abort this recording,
the left arrow button(quit) will re-enter this menu.
33
Bekijk gratis de handleiding van Elation Stage Q, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Stage Q |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2570 MB |
