Elation Stage Q handleiding
Handleiding
Je bekijkt pagina 28 van 48
This menu allows you to send the library, memory and setup to a PC(personal computer)
as backup via the RS-232 port. Use the Cursor UP/DOWN buttons or F4 fader to select
the item you want to send. Before you can press the right arrow button to commence
sending , be sure that the connection between this unit and the PC has been established
successfully and that Windows configuration has been completed properly. It will take
you about five(5) minutes to send the library file, 12 minutes to send the memory file
and some seconds to send the setup file.
To connect to a PC, you will need a serial lap link cable available at any computer store.
A standard RS-232 cable will not work. Connect the RS-232 port on Stage Q to
one of the Serial " com" ports on your PC.
You will need a PC running Windows 95/ 98 or higher to connect to Stage Q.
Windows comes with an accessory called Hyper Terminal that can communicate with
Stage Q via one of the "COM" ports on your PC. Determine which of your "COM"
ports is available. COM 1 is generally used for the mouse so it is always advisable to
connect your COM 2 on your PC.
You must first configure Hyper Terminal to work with Stage Q. Start the Hyper
Terminal program by clicking on "Start" in Windows then "Programs" then "Accessories"
then "Hyper Terminal" then "Hypertrm". If for some reasons Hyper Terminal is not installed
on your version of Windows, install it from your Windows CD. Go to the control panel,
select Add/Remove Programs, select Windows Setup, and then select Communication.
Follow the instructions to complete the installation.
Once the Hyper Terminal Program is getting started, you will be asked to choose a name
and an icon. Name it Stage Q then pick any icon then click OK. Go to the next
dialog box "Connect to" and choose "Direct to COM 2" . Ignore the telephone number
and other settings in this box then click OK. In the next dialog box, set bits per second
to 38400, data bits to 8, parity to none, stop bits to 1, flow control to none, then click OK.
You will access Hyper Terminal desktop. Click File menu in the upper left corner of the
desktop, then "Properties", then select the "settings" tab. From the settings tab click
"ASCII Setup". In the next dialog box, leave all settings deselect, then OK. Close Hyper
Terminal and you will be prompted to save this Hyper Terminal setup. Click YES to save
it then you will have a program labeled "Stage Q.ht". You may want to make a
shortcut on your desktop if you plan to use your PC with Stage Q often. From
this point on, whenever necessary, you can just click Stage Q.ht icon to invoke
the Stage Q Hyper Terminal configuration quickly.
Stage Q to
Help - RS-232 connection and Windows Configuration
Setup Menu
24
Bekijk gratis de handleiding van Elation Stage Q, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Stage Q |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2570 MB |
