Elation Stage Q handleiding
Handleiding
Je bekijkt pagina 16 van 48
This menu allows you to obtain Remote Reset and Remote lamp on/off functions if it
has this fixture. These settings will be used for the Reset and Lamp functions. Use the
Cursor UP/DOWN buttons to set the value, LEFT/RIGHT to pass from element to element.
You can also use F1-F6 faders in combination with LEFT/RIGHTto set the values. Reset
and Lamp can use identical or different channels.
Reset/ Lamp Values
In Create New Fixture menu, use Cursor UP/DOWN buttons or F5 fader to scroll to
[ RESET/ LAMP VALUES].
Select feature to configure for
esc
ok
FIXTURE NAME - [ ]RESET/ LAMP VALUES
Press right arrow button, a warning message appears, reminding you not to reuse
one same DMX channel for different effects. "ok" confirms, a dialog box will appear.
RESET LAMP
[ -- ]
esc
ok
--
OFF
--
ON
--
OFF
--
ON
--
In the case:
RESET LAMP
[ 12 ]
esc
ok
--
OFF
--
ON
--
OFF
0
ON
255
These settings indicate that the Remote Reset channel operates on channel 12.
Press right arrow button to confirm your settings.
Dip-Switch Configuration
In Create New Fixture menu, use Cursor UP/DOWN buttons or F5 fader to scroll to
[ DIP-SWITCH CONFIG.].
Select feature to configure for
esc
ok
FIXTURE NAME - [ ]DIP-SWITCH CONFIG.
Setup Menu
12
Bekijk gratis de handleiding van Elation Stage Q, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Stage Q |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2570 MB |
