Elation Power Spot 250 handleiding
Handleiding
Je bekijkt pagina 11 van 48
Power Spot 250™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 11
2. Preparation and Installation
2.1 Mounting
The POWER SPOT 250™ is fully operational in two different mounting positions,
hanging upside from a ceiling or set on a flat level surface. To avoid internal
damage to the unit, never mount the unit on its side as illustrated below. Be sure
this fixture is kept at least 0.5m away from any flammable materials (decoration
etc.). Install a safety cable that can hold at least 10 times the weight of the fixture.
Never use the carrying handles for secondary attachment.
Refer to regulations BGV C1 (formerly VBG 70) and DIN VDE
0711-217 for proper installation in Europe
To ensure proper installation, only qualified staff should attempt
installation.
2.1.1 Clamps
The POWER SPOT 250™ has been designed to hold multiple clamps to the
bottom of the unit in several different orientations. Always use an appropriately
rated clamp to mount this unit to truss. Refer to the printed instructions on the
bottom of the fixture for proper clamp installation.
Bekijk gratis de handleiding van Elation Power Spot 250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Power Spot 250 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4681 MB |
