Elation Power Spot 250 handleiding
Handleiding
Je bekijkt pagina 10 van 48
Power Spot 250™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 10
12. DMX Input Jack – This jack is used to receive an incoming DMX signal or
Master/Slave signal.
13. DMX Output Jack – This jack is used to transmit the incoming DMX signal to
another DMX fixture, or transmit a Master/Slave signal to the next Power Wash
250™ in the chain. For best results in DMX or Master/Slave mode terminate this
jack if it is the last fixture in the chain. See “Terminator” on page 14.
14. Power Switch – This switch is used to control main power to the fixture.
15. Fuse Holder – This housing stores a 6.3 amp (3.15 amp 220v) GMA protective
fuse. Never defeat the fuse, the fuse is designed to protect the electronics in the
event of sever power fluctuations. Always be sure to replace the fuse with an exact
match as to the one being replaced, unless otherwise told to do so by an
authorized Elation® service technician.
16. Cooling Fan - This fixture is equipped with a high velocity variable fan to aid in the
cooling process. This fan is designed to vary its’ velocity at different operating
temperatures, to provide better cooling when the fixture reached higher operating
temperatures associated with long usage. Be sure to never obstruct the cooling
fan during normal usage. Also, be sure to keep this vent clean at all times. A
blocked or malfunctioning cooling system may shorten lamp life and fixture
reliability.
Bekijk gratis de handleiding van Elation Power Spot 250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Power Spot 250 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4681 MB |
