Elation Lumina Strip handleiding
Handleiding
Je bekijkt pagina 7 van 13
OPERATION MODES
The “Lumina Strip” has two different operation modes. It can be used as a 07, 08, 10,11, 16 channel DMX dimmer. Tap “Mode”
button to switch the operation mode between “Receive Mode” and “Chase Mode”. Please follow illustrations below to
operate the unit in your desired mode.
Use this operation mode only when you are about to use the unit as a DMX dimmer. This function can allow
SA-10 LED DMX Map
you set your unit dimmer function as a 07, 08, 10,11 or 16 channel DMX dimmer and DMX address. Tap “Mode”
button to switch the operation mode between “DMX” and “Program”.
DMX Mode
Mode
Parameter Parameter Value
Function
DMX
Program
Address
Channel
No DMX
Glide
Program
Speed
Master
Lamp Mode
Fade Time
001-512
07/08/10/11/16
OFF/Hold/Program
OFF/ON
Full/01--16/AUTO
01-100
00-100
Tungsten/LED
00-100
To set the initial DMX receiving address
To set the DMX Control Mode
To set the status of the fixture when DMX signal is input
To set the output of the DMX Data
To select a built-in program
To set the speed level of the built-in Program
To set the intensity
To set the mode of Lamp
To set the speed of the Fadetime
Lumina Strip
6
Bekijk gratis de handleiding van Elation Lumina Strip, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Lumina Strip |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2105 MB |
