Elation KL PAR IP COMPACT handleiding
Handleiding
Je bekijkt pagina 11 van 44
11
INSTALLATION GUIDELINES
CLAMP INSTALLATION: Insert a bolt of appropriate size and rating for the desired clamp (not
included) through the mounting hole of the clamp (not included), and then insert it into the center
hole on the Omega bracket. The bolt should pass through both the clamp and the Omega bracket.
Thread a matching washer and locking nut onto the shaft of the bolt that extends out from the
underside of the Omega bracket. Then, insert the two Omega bracket twist-lock fasteners into the
mounting holes on the xture’s mounting yoke, and twist to secure in place.
SAFETY CABLE: The xture provides a built-in rigging points for a Safety Cable on the rear of the
xture near the touch screen. Be sure to only use the designated rigging point for the safety cable, and
never rely on any other location on the xture to secure the safety cable.
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE
IN A SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE WILL NOT
FALL IF THE CLAMP FAILS. ONLY USE DESIGNATED RIGGING POINTS FOR
SAFETY CABLE, AND NEVER ATTACH A SAFELY CABLE TO A CARRYING
HANDLE.
IF THE FIXTURE IS FITTED WITH THE OPTIONAL
GEL FRAME OR BARNDOOR ASSEMBLY, THE
FIXTURE MUST BE ORIENTED WITH THE LATCH
FACING UPWARDS. THIS IS TO PREVENT THESE
ACCESSORIES FROM FALLING IN THE EVENT THAT
THE LATCH FAILS.
Safety
cable
attached
to loop
Bekijk gratis de handleiding van Elation KL PAR IP COMPACT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | KL PAR IP COMPACT |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5062 MB |
