Elation KL PAR IP COMPACT handleiding
Handleiding
Je bekijkt pagina 10 van 44
10
INSTALLATION GUIDELINES
FLAMMABLE MATERIAL WARNING
Keep xture minimum 1.6 feet (0.5m) away from ammable materials and/or pyrotechnics.
ELECTRICAL CONNECTIONS
A qualied electrician should be used for all electrical connections and/or installations.
MINIMUM DISTANCE TO SURFACES/OBJECTS IS 1 FOOT (0.3 METER).
MINIMUM DISTANCE TO FLAMMABLE MATERIALS IS 1.6 FEET (0.5 METER).
AMBIENT TEMPERATURE RANGE IS 5° F TO 113° F (-15° C TO 45° C).
DO NOT INSTALL THE FIXTURE IF YOU ARE NOT QUALIFIED TO DO SO!
Fixture MUST be installed following all local, national, and country commercial electrical and
construction codes and regulations.
Before rigging/mounting the xture to any metal truss/structure or placing the xture on any
surface, a professional equipment installer MUST be consulted to determine if the metal truss/
structure or surface is properly certied to safely hold the combined weight of the xture,
clamps, cables, and accessories.
Overhead rigging requires extensive experience, including, amongst others, calculating working
load limits, installation material being used, and periodic safety inspection of all installation
material and the xture. If you lack these qualications, do not attempt the installation
yourself. Improper installation can result in bodily injury.
Fixture is intended for installation in dry, indoor environments only! Damage resulting from
exposure to rain or moisture will void your manufacturer’s warranty.
Fixture ambient operating temperature range is 5°F to 113°F (-15°C to 45°C). Do not operate
the fixture when the ambient temperature falls outside of this range.
Fixture(s) should be installed away from walking paths, seating areas, or areas were
unauthorized personnel might reach the fixture by hand.
NEVER stand directly below the fixture(s) when rigging, removing, or servicing.
Overhead fixture installation must always be secured with a secondary safety attachment,
such as an appropriately rated safety cable.
If this xture is installed in an overhead position with the optional gel frame or barndoors
tted, the xture must be positioned with the lens frame latch oriented upward. Doing so will
ensure that the gel frame or barndoor assembly will not fall in the event that the latch fails.
Allow approximately 15 minutes for the fixture to cool down before servicing.
Powering down the fixture when not in use is strongly recommended.
Bekijk gratis de handleiding van Elation KL PAR IP COMPACT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | KL PAR IP COMPACT |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5062 MB |
