Elation Event Bar handleiding

Verlichting

Elation

10 pagina's

PDF beschikbaar

Handleiding

©Elation Professionals® - www.elationlighting.com - Event Bar Instruction Manual Page 13 ©Elation Professionals® - www.elationlighting.com - Event Bar Instruction Manual Page 14

Universal DMX Control: This function allows you to use a

Elation® universal DMX-512 controller to create unique pro-

grams tailored to your individual needs.

1. The Event Bar has three DMX channel modes. To set the

DMX channel mode see page 10. See pages 15-16 for the

DMX modes & traits.

2. To control your fixture in DMX mode, follow the set-up pro-

cedures on pages 5-7 as well as the set-up specifications

that are included with your DMX controller.

3. Use the controller’s faders to control the various DMX fixture

traits.

4. This will allow you to create your own programs.

5. Follow the instructions on page 10 to set the DMX address.

6. For longer cable runs (more than a 100 feet) use a termina-

tor on the last fixture.

7. For help operating in DMX mode consult the manual includ-

ed with your DMX controller.

Event Bar Universal DMX Control

Event Bar Home Position Adjust

With this function you can adjust and set the xtures home

position.

1. Press the ENTER button for at least 5 seconds to enter into

offset mode.

2. Press the UP or DOWN buttons until “Offset” is displayed,

and press ENTER. The display will begin to ash.

3. Press the UP or DOWN buttons to adjust to your desired

home position. Once you have found your desired position

press the ENTER button to set and save, or press the MENU

button to return to return to offset functions without any

changes. If you do not press any buttons for 8 seconds the

xture will return to the offset functions automatically.

Event Bar System Menu & Operation

ning time of the unit.

1. Press the MENU button until “Fixture Time” is displayed,

press ENTER.

2. The display shows the running time of the unit. Press MENU

to exit.

Firmware Version - Use this function to display the Firm-

ware version of the unit.

1. Press the MENU button until “Firmware Version” is displayed,

press ENTER.

2. The display will show the software version. Press MENU to

exit.

Fixture Reset - Use this function to reset the unit.

1. Tap the MENU button until “Fixture Reset” is displayed,

press ENTER.

2. The xture will now reset.

Event Bar UC3 Control

Stand by

Blackout the unit

Function

1. Synchronous Strobe

2. Two light Strobe

3. Sound Control

Select

Show 1-11

Select Speed

1.Fast

2.Middle

3.Slow

Mode

Strobe (LED OFF)

Chase (LED ON) LED blinking

Bekijk gratis de handleiding van Elation Event Bar, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.