Elation ELAR Q1 handleiding
Handleiding
Je bekijkt pagina 16 van 26
www.elationlighting.com
www.elationlighting.com
16 ELAR Q1™ User Manual ver 1
SYS TEM INSTALLATION GUIDE
PRE-INSTALLATION
It is highly recommended to first confirm all the required hardware is available to
support your system design, before beginning the installation process. Since the
ELAR Q1™ system can be customized with a varying number of fixtures and
distances between them, it is imperative to confirm the correct cable types, lengths,
quantities, and power supplies are available to support the total number of fixtures
you plan to install.
DMX ADDRESS / RDM DEVICE ID
Each fixture comes with a pre-assigned DMX ADDRESS and an RDM DEVICE ID, which
can be found on the 2 labels located on the Y portion of the cable attached to
each fixture. (See image below. DMX Address on label for illustration purposes only).
The DMX ADDRESS will be pre-assigned to 001, which you will need to change as per
your system requirements.
The RDM DEVICE ID will be pre-assigned to a unique ID. Please make sure to note the
ID of each fixture in your system, as you will need this ID in order to change the DMX
ADDRESS as per your system requirements.
CHANGING THE DMX ADDRESS
In order to change the DMX ADDRESS, you will need a DMX controller with RDM
(Remote Device Management) support. Although a DMX controller is required to
control the (4) DMX channels (CH1 - Red, CH2 - Green, CH3 - Blue, CH4 - White) of
each fixture, you can alternatively use an external hand-held RDM control device to
assign the individual DMX addresses of each ELAR Q1™ fixture.
Bekijk gratis de handleiding van Elation ELAR Q1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | ELAR Q1 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4845 MB |
